Products / Solar mounting structures / Rooftop
Rooftop structure before panel installation
Solar mounting structures / Project-specific supply
Rooftop Solar Mounting Structures
Factory-fabricated C-Lip structures, supplied in a foldable, bolt-assembled configuration and customized to your solar panel layout, required height and inclination.
| Standard C-Lip profiles | 65 × 40 × 15 × 2 mm; 75 × 40 × 15 × 2 mm; 100 × 55 × 15 × 2 mm; 120 × 55 × 15 × 2 mm |
|---|---|
| Regular material | GI with 80/120 GSM coating options |
| Other material options | HDGI, ZAM / POSMAC and MS, subject to project requirement, applicable MOQ and material availability |
| Minimum order quantity | 1 set |
Connection arrangements
- Leg / pillar to rafter
- M12 GI / SS, selected for the approved design
- Rafter to purlin
- M10 GI / SS; M10 high-strength GI J-hook alternative where applicable to the project design
- Purlin to solar panel
- M8 GI / SS; M8 high-strength GI J-hook alternative where applicable to the project design
Design & supply notes
Confirmed for your project.
The listed GI / SS connections are reference arrangements; high-strength GI J-hook alternatives apply only where selected for the approved project design. Base plates may be factory welded to legs where applicable. After welding, chemical cold-dipping treatment is applied to improve rust resistance. Rooftop anchors are selected per project, typically M10–M16 and 100–200 mm long. Actual member selection follows structural design.
Customization & quotation
What to share with us
- Solar panel layout and module dimensions/specifications
- Required front height and tilt / inclination
- Portrait or landscape orientation
- Rooftop requirements and required quantity
Discuss your mounting requirement
Our team reviews the relevant specifications, availability and manufacturing feasibility before quotation and confirmation.
Send your requirement ↗International supply, delivery and commercial terms are subject to quotation and confirmation.